Polyurethane draughtsman chair. Cushioned polyurethane seat & back. Can be washed or steam cleaned. Ideal for all industrial applications. Tilting back mechanism. Piston extension. Adjustable black footring.
The footring is strong black nylon and the gas lift completely black to match the detail of the rest of the chair. The gaitor covering the back stem gives this chair a nice overall finish.
A 2 lever mechanism controls the seat height and back angle. The back height is also adjustable. A seat tilt adjustment is also available as an additional option (see below).
This draughtsman chair is supplied with glides as standard. Please see the 'Castors/Glides' options below for a range of castors that are available for this chair. Please note that adding castors to draughtsman chairs may contravene health and safety and are added at your own risk.
Weight tolerance: 20 Stone
Dimensions:
Seat Width: 470mm
Seat Depth: 440mm
Back Height: 410mm
Back Width: 410mm
Seat Height: 590-840mm
This chair is delivered built and no assembly is required.
Glides: Glides are supplied as standard. These are flat feet fitted to the base of the chair (as shown in the image) rather than castors that you would would normally see on an office chair.
Standard Castors: These are an optional extra (instead of glides). The same as castors you would see on most office chairs.
Soft Castors: These are castors with a hard rubber edge on the wheels. This is to help with grip and help the castors to roll rather than sliding on hard floors such as tiles or laminate floors.
Brake Loaded Castors: These will allow the chair to be freely moved around as with standard castors when no one is sitting on the chair. When there is weight on the chair, a brake is applied to the castor wheels and prevent the chair from moving. This helps with safety to prevent the chair from sliding forwards or backwards if the 'user' leans to far one way or the other.
Soft Brake Loaded Castors: A combination of Brake Loaded and Soft Castors.
